SuperTires 1/32

"Tear up the competition not your tires"

$2.00 a pair

#	Part No.	Fits	Profiles	Rear Tire
1	Tyco 418	Tyco 440 Tyco 440 x2 Super G-Plus see general information below	xxx Low	.418"	Black
2	Tyco 422		xx Low	.422"	Black
3	Tyco 426		xLow	.426"	Black
4	Tyco 430		Low	.430"	Black
5	Tyco 434		Medium	.434"	Black
6	Tyco 438		High	.438"	Black
7	Tyco 442		xHigh	.442"	Black
8	Tyco 448		xxHigh	.448"	Black
9	LL442	Life Like	Low	.442"	Black
10	LL446		Medium	.446"	Black
11	LL450		High	.450"	Black
12	Tomy 458	Tomy Turbo	Medium	.458"	Black
13	HR 430	T-Jet/Hot Rods	Medium	.430"	Black
14	AFX 474	Original AFX Magnatraction Tyco HP-7	Medium	.474"	Black
15	T-Jet 378	Thunder Jet Standard Wheel	Medium	.378"	Black
16	Tuff-1 378	Tuff-Ones Standard Rear Wheel	Medium	.378"	Black
17	AFX 510	AFX Specialty half width rims*	Medium	.510"	Black

On a Super G+ the rear hubs must be changed to accept any tire other than the type they come with. We recommend double flanged hubs .250 OD and Tyco Super tires .426 or greater depending on the rail height of your track. Heights given are when mounted on stock rims.

· After the first year of production Aurora reduced the size of the rear tire used on Sepcialty Chassis from full width of the to about half width. These tires will fit the half width size perfectly. For full width AFX Specialty rims see the listing of NJN tires.

These tires are a soft RTV silicone with a rounded outside edge. They are very sticky and grip the hub well. We recommend using masking tape to remove dirt accumulation from the surface of the tire and CAREFULLY removing the tire from the hub if stored for long periods (months/years) of time to prevent tires from stretching to mounted hub size and losing their grip on the hub.

NJN 001	soft low profile silicone slicks with rounded outside edge to fit original t-jet hubs or JWWO1 pr (specify black or white ) PAIR	$1.10
NJN 002	Soft low profile silicone slicks with rounded outside edge to fit original AFX rear hubs or JWW10 pair black or white	$1.25
NJN 003	Soft low profile silicone slicks with rounded outside edge to fit original AFX front hubs (we recommend these be glued or silicone caulked on) pair black only	$1.10
NJN 004	Soft low profile silicone slicks with rounded outside edge to fit full width specialty AFX rear hubs (for Vans, Model As, etc) pair black only	$1.50
NJN 005	soft silicone slicks made to fit tuff ones hubs or MM series wheels in pairs ( black or white, please specify)	$1.10
NJN 005 NT	No tear t-jet silicones squared off edge black and colors (ask) pair	$2.00
NJN 006NT	No tear silicone Tuff Ones tires, lower profile than NJN 005, squared off outside edge- Rear (Black only) pair	$2.00
NJN 007	Soft silicone slicks made to fit AFX Dragsters, Peace Tank, Roarin Rolls with wide full width hubs black only pair	$1.50
NJN 008	Soft silicone slicks made to fit Tyco rear hubs (best on narrow 440X2 chassis) .438 mounted height pair black only For Tyco no tear Super tires see Super Tire page	$1.25
NJN 009	XX low Soft silicone slicks made to fit Tyco rear hubs (best on narrow 440X2 chassis) .418 mounted height pair black only	$1.25
NJN 001 TS	Soft silicone slick like NJN 001 but with tread design molded into the outside edge	o/s